The hybrid operating room should have a size of approximately 70 m². At least 10 m² should be provided for the adjacent technical and control room. Since X-rays are used here, all elements bordering the room must be protected with lead 1.5–2.0 mm thick. Due to the high demand for bacteria-free and low-turbulence air, the operating room must be equipped with a laminar.
The operating table should be located in the center of the room and have a carbon composite tabletop to allow for all imaging modalities. Surgical lights are positioned at the top of the sterile field to capture the best range of light from the patient's hair to the toes.
A double ceiling anchor with access for connecting an anesthesia console and a lead shield for X-ray radiation is installed in the patient's head. From the side of the legs, the operating room is equipped with a console for surgical equipment and a perfusion console
In a general surgical operating room, the following equipment can be integrated:
- Endoscope 4K/3D
- Patient monitor
- ultrasound
overview cameras - Camera in the surgical light
- Workstation (PACS, MIS)
The equipment used for integration depends primarily on the equipment and the selected operating room profile.
- Workstation with 27” keyboard
- Integrated operating room control monitor 32”
- Overview Monitor 49”
- Double information panel 2x24”
- Socket block
